JWC-10 TROLLEY MOUNTED DTHR WATER WELL DRILLING RIG

The JWC - 10 is Trolley Mounted DTHR Water Well Drilling Rig especially designed for water well drilling up to 330 foot (100 Meters) for a drill diameter 6 1/2" (165 mm). It is also capable of Rotary drilling with 4700 Kg pull up force and 0 - 80 RPM or may be used with down the hole drills of 61/2" when equipped with a high pressure air compressor. The same rig can also be utilize for exploration and micro piling work





TECHNICAL SPECIFICATIONS - JWC-10 TROLLEY MOUNTED DTHR WATER WELL DRILLING RIG
DRILLING DEPTH Maximum 61/2" Þ Bore Holes, 100 Meter (330 Foot) by using 2 1/2" Drill Rods Odex Dia. - 5" - 300 foot depth
PRIME MOVER Rig hydraulic system is powered from the deck engine - 75 Hp
WORK METHOD DTH and Rotary Mud Drilling
MAST 5" Channel Structure Mast, Maximum Capacity - 8 Tons, Height - 3.65 Meter (12 Foot), Rod Handling - 60", Centralized Opening - 7"
PULL UP SPEED 37 Meter / Min (122 Foot/Min)
PULL UP FORCE 4 700 Kg / 10 360 lbs
PULL DOWN SPEED 50 Meter / Min (164 Foot/Min)
PULL DOWN FORCE 2 600 Kg / 5 732 lbs
HYDRAULIC SYSTEM 210 Kg/cm2 (3000 psi)
Oil Tank - 300 Liters, Oil Filters - SC2-75 - 02 no.
REEVING RATIO 1:3
ROTARY HEAD Maximum Torque 303 Kg-Meter (26 400 lbs-inch), OMT-315 Orbital Motor
ROTARY HEAD SPEED 0 to 100 rpm
WATER INJECTION PUMP 36 LPM , 40 Kg/cm2 water pump driven by hydraulic motor
ADDITIONAL FEATURES Night Lights, Tool Box
SUITABLE COMPRESSOR 450 CFM/150 psi, 450 CFM/175 psi, 600 CFM/ 200 psi
AIR LINE LUBRICATOR Standard - 3 Liters
LEVELLING JACK Four Hydraulic Leveling Jack for accurate leveling drill point having separate lever
BREAKOUT WRENCH Hydraulic operated breakout wrench for fast breaking of rod joints
OPTIONAL ATTACHMENTS • Welding Machine
• Auxiliary Winch - 1 Ton
• Single Rod Changer
• Centrifugal Mud Pump - 3" x 3"