SOLID 60 TRUCK MOUNTED DTHR WATER WELL DRILLING RIG

The SOLID 60 is Truck Mounted DTHR Water Well Drilling Rig especially designed for water well drilling up to 2 000 foot (600 Meters) for a drill diameter 6 ½" −12". It is also capable of Rotary drilling with 36 000 Kg pull up force and 0 − 100 RPM or may be used with down the hole drills when equipped with a high pressure air compressor. The SOLID 60 is double truck version DTHR Drilling Rig in which rig construction on one truck, in which hydraulic operations are driven by deck engine whereas carrier truck is utilized for compressor mounting.


TECHNICAL SPECIFICATIONS - SOLID 60 TRUCK MOUNTED DTHR WATER WELL DRILLING RIG
DRILLING DEPTH 6 ½" Þ − 12"Þ Bore Holes, 600 Meter (2000 Foot) by using 4 ½" Drill Rods Odex Dia. − 5" to 8" − 1 500 foot depth
PLATFORM 10" Section welded steel structure covered with chequered plate.
PRIME MOVER Rig hydraulic system is powered from deck engine
WORK METHOD DTH and Rotary Mud Drilling
MAST 10" Channel Structure Mast, Height −9 Meter (29.5 Foot), Rod Handling − 15 Foot / 20 Foot Rod, Rotary Head Travel − 7 940 mm, Centralized Opening − 16" (406 mm), 20 mm double wire rope
MAST RAISING CYLINDER Single hydraulic cylinder for mast raising and lowering
PULL UP SPEED 50 Meter / Min (164 Foot/Min)
PULL UP FORCE 36 000 Kg / 79 366 lbs
PULL DOWN SPEED 72 Meter / Min (236 Foot/Min)
PULL DOWN FORCE 26 000 Kg / 57 320 lbs
HYDRAULIC SYSTEM 210 Kg/cm² (3 000 psi)
Oil Tank − 1 000 Liters, Oil Filters - SC²-100 - 04 no.
Double super system, Hydraulic Oil Cooler − Standard Fin Type 95 GPM
REEVING RATIO Double acting hydraulic cylinder with 1:3 rope reeving ratio
ROTARY HEAD Standard Torque 66 000 lbf.in (760 kgf.m) at 0-100 rpm. Other options are available on request
HYDRAULIC OPERATION Fixed displacement pump for feed and rotation − 2
Fixed displacement pump for mud pump − 1
Fixed displacement pump for auxiliary operations and micro feed-2
Fixed displacement pump for auto rod handling - 2
WATER INJECTION PUMP Triplex reciprocating pump of up to 110 lpm and pressure up to 565 psi (39 Kg/cm²) powered by hydraulic motor
ADDITIONAL FEATURES Night Lights, Tool Box and hammer box
SUITABLE COMPRESSOR 1350 CFM − 425 psi (29.30 BAR) Atlas Copco
AIR LINE LUBRICATOR Standard
LEVELLING JACK Six Hydraulic Leveling Jack for accurate leveling drill point having separate lever
SUITABLE TRUCK OPTION Ashok Leyland − 2523
MAN - 25300
WINCH Standard, 2 Ton Capacity
AURO ROD CHANGER (OPIONAL) Hydraulically operated Automatic Rod Handling system provided with the rig for loading and unloading of drill pipes from the deck.
CONTROL PANEL Centralized control panel, left side of the drill table with all necessary gauges and control system